KX Carbon Block Cartridge, 2.3 gpm recommended flow - 2 Micron Absolute, 45,000 gallon rating - 2.5" X 20"
$55.00
(More Info)
|
KX Carbon Block Cartridge, 7.0 gpm recommended flow - 2 Micron Absolute (0.6 micron nominal) 150,000 gallon rating - 4.5" X 20":
$106.00
(More Info)
|
KX Carbon Block Cartridge, 3.0 gpm recommend flow - 2 micron absolute (0.6 micron nominal) 70,000 gallon rating - 4.25" X 9.75":
$75.00
(More Info)
|
KX Carbon Block Cartridge, 2.3 gpm recommended flow - 5 Micron absolute, 15,000 gallon rating - 2.5" X 20":
$55.00
(More Info)
|
KX Carbon Block Cartridge, 7.0 gpm recommended flow - 5 Micron absolute, (2 micron nominal) 42,000 gallon rating - 4.5" X 20":
$99.00
(More Info)
|
KX Carbon Block Cartridge, 3.0 gpm recommended flow -(Private Well) 5 Micron Absolute (2 micron nominal) 20,000 gallon rating - 4.5" X 9.75": Free shipping (USA only)
$59.00
(More Info)
|
KX Carbon Block Cartridge, 2.0 gpm recommended flow - 10 Micron Absolute, 9,000 gallon rating - 2.5" X 20":
$44.00
(More Info)
|
KX Carbon Block Cartridge, 7.0 gpm recommended flow - 10 Micron absolute, (5 micron nominal) 26,000 gallon rating - 4.5" X 20":
$76.00
(More Info)
|
KX Carbon Block Cartridge, 3.5 gpm recommended flow - 10 micron absolute (5 micron nominal) 12,000 gallon rating - 4.25" X 9.75": whole house
$49.00
(More Info)
|
Contains Calcite to correct acidic water (less than 6.5 pH) to perfectly neutral. Also contains small amount of GAC (granulated activated carbon) for off-tastes and odors. Approximately one year life for a family of four
$39.00
(More Info)
|
Contains Granular Ferric Oxide media specially formulated to remove arsenic V and III for up to 1 year (1,000 gallons). Water should have a pH of 6.5 to 8.5, have less than 0.5 ppm iron, and less than 0.005 manganese Free shipping (USA only)
$109.95
(More Info)
|
MULTIMEDIA CARBON BLOCK FILTER CARTRIDGE High performance carbon block cartridge. Rated at 20,000 gallons for chlorine, 2,000 for lead, 600 gallons for VOC, 500 for MTBE. Compare at $39
$39.00
(More Info)
|
Doulton Sterasyl Ceramic filter cartridge for CTD-C and UCD-C. Can also be used in any industry-standard housing designed for 2" X 9.75" cartridge
$71.40
(More Info)
|
High-Flow Doulton Imperial Sterasyl Ceramic cartridge. Larger diameter (2.75" vs. 2") provides 37% more surface area than CER for higher flow rates,
$71.40
(More Info)
|
Multi-media filter cartridge KDF GACfor CT, UC, UCD, and NaK-UC. Will also fit housings designed for standard 9 3/4" cartridges. Rated to treat 12,000 gallons;
$59.00
(More Info)
|
Contains fine-mesh pre-conditioned Activated Alumina to reduce fluorides below 0.5 ppm. Also effectively removes low levels of arsenic.
$61.40
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 8 gpm peak recommended flow - .035 Micron - 2.5" X 20":
$42.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 8 gpm peak recommended flow - 1 Micron Absolute - 2.5" X 20" Free Shipping (USA only)
$39.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 15 gpm peak recommended flow - 1, 5, 20 or 50 Micron - 2.5" X 20":
$39.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 9 gpm peak recommended flow - 0.35 Micron - 4.5" X 9.75":
$49.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, (Whole house) 9 gpm peak recommended flow - 1 Micron Absolute - 4.5" X 9.75":
$59.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, (Private well) 15 gpm peak recommended flow - 1, 5, 20 or 50 Micron - 4.5" X 9.75":
$43.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 13 gpm peak recommended flow - 0.35 Micron - 4.5" X 20":
$69.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 12 gpm peak recommended flow - 1 Micron Absolute - 4.5" X 20":
$89.00
(More Info)
|
FLOW-MAX Pleated Sediment Cartridge, 25 gpm peak recommended flow - 1, 5, 20 or 50 Micron (select on ordering page) - 4.5" X 20":
$59.00
(More Info)
|
Contains KDF-85 and GAC (granulated activated carbon) to remove iron and hydrogen sulfide from well water. Life is dependent on water quality and usage - replace when taste and odor return.
$49.00
(More Info)
|
Carbon block cartridge with a Ster-O-Tap capillary membrane cartridge insert. Rated at 20,000 gallons for chlorine, 2,000 for lead, 600 gallons for VOC, 500 for MTBE.
$89.00
(More Info)
|
Contains a special nitrate-selective resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels. This cartridge can be regenerated using sodium chloride brine.
$51.40
(More Info)
|
A unique feature is the "Quick Flush" back-wash. Simply twisting the cartridge to the "Flush" mark will reverse the flow "back-wash" to release the sediment that can cause other shower filters to fail prematurely.
$44.95
(More Info)
|
String Wound Sediment whole house Cartridge, 15 gpm peak recommended flow - 1, 5 or 20 Micron (select on ordering page) - 4.5" X 9.75":
$21.40
(More Info)
|
: Sediment (at least every year) Free shipment (USA only)
$25.00
(More Info)
|
String Wound Sediment Cartridge, 25 gpm peak recommended flow - 1, 5, or 20 Micron (select on ordering page) - 4.5" X 20"
$43.00
(More Info)
|
String Wound Sediment Cartridge, 10 gpm peak recommended flow - 1, 5 or 20 Micron (select on ordering page) - 2.5" X 20"
$28.00
(More Info)
|
SEDIMENT/CYST FILTER CARTRIDGEThis 1 micron sediment prefilter provides ultra-clean, cyst-free (Cryptosporidium, Giardia) water. Deep pleat design has up to 10 times the life of other type filters,
$29.60
(More Info)
|
Contains a high-efficiency ion-exchange resin regenerated in the potassium form. It will remove virtually all sodium (and hardness) and exchange it for potassium. Can be regenerated using potassium chloride brine (about once a month).
$61.40
(More Info)
|
Replacement Cartridges WHOLE HOUSE SEDIMENT ONLY - HIGH FLOW
$43.00
(More Info)
|
SPF-34 WHOLE HOUSE SEDIMENT ONLY Replacement Cartridge
$29.60
(More Info)
|
The Ster-O-Tap Low Pressure Membrane technology removes bacteria and cysts - down to 99.9999999% (9 log). It strains down to 0.15 microns - the smallest know bacteria is 0.3 microns. It does this without the flow restriction of ceramic filters, and without constant cleaning! It is replaced about every two years. It can be added to any existing filter or reverse osmosis system as a final treatment (it is recommended that a prefilter of 1 micron or less be used). The Ster-O-Tap module kit includes the housing with Quick-Connect fittings for 1/4" tubing, and the Ster-O-Tap cartridge
$169.00
(More Info)
|
|
|